Wire problems are one ofthe leading causes of disposable vapes not functioning at all. Before throwing
away your vape, try some minor repairs. Try our suggestions for getting your
vape back up and running.
First off, attempt to cleanout any debris from the heating chamber. If the coil appears clean, shake it
inside the chamber using a paper clip. Sadly, the only alternatives are
soldering or replacing the damaged electrical cable.
Tidying up the cables:
Remove the heating chamberof your vape pen. The mouthpiece islocated at the top end of the vape pen. To remove it, turn it counterclockwise.
Now, you'll see the heating chamber filled with coils. Keep the wire coil
stationary and pull it off similarly. First, the pen needs to be heated before
cleaning off any debris. But turn off the vape if you are to disassemble it,
and keep your distance if it is too hot.
Make sure to clean the heating chamber thoroughly:
Then, seal the heatingchamber and place it in a garbage bag; tap on a solid surface like your palm to
remove the loose particles. Clean the inside of your vape carefully with a
cleaning solution.
Most disposable vape packscome with a small brush to help you clean your vape, such as Nasty Bar 8500 puffs and Myle Meta 9000puffs vape.
To remove the wax and oil from the coil, wipe it with isopropyl alcohol:
Buy a bottle of isopropylalcohol from the chemist or general shop. Instead of soaking a cotton swab, wet
it. The isopropyl alcohol need not penetrate the residue pen mixture. If the
coil and chamber appear coloured or clogged with debris, use the cotton swab to
clean them.
● Handle it carefully with the coil. Themost delicate part of the pen is the wire, and that's how pens usually break.
● Do not rinse the inner part of theheating chamber with water because it may short circuit. Rinse your disposable
vape outside with water only.
Screw the pen back together to test it.
Make sure you clean and dryout your vape before screwing it back. Attach the heating chamber back before
you start using the pen. It must emit smoke and shine usually. If it does not
work, it might require further cleaning, or the wire might be faulty.
Method 2
Adjusting the Coil
Disassemble the pen to see inside the heating chamber.
● Remove the mouthpiece of the pen oncemore. When you see the wire coil inside the heating chamber, you will want to
continue taking apart pieces. It will be located precisely above the lowest point
where the battery rests.
● Check if the pen is cool to touch. If thecoil needs to be replaced, the pen will not even heat. If you can feel a little
heat coming from the coil, avoid it.
Check if the screws are screwed in:
Two screws are holding thecoil in place within the heating chamber. One screw is provided at the bottom
of the coil, and it helps position the coil above the battery; the other screw
is placed at the higher end, which fastens the coil to the wall of the heating
chamber.
If the screws are not inplace, then it is most probable that your coil is under position. Take it to
any vape pen store for new screws.
Conclusion:
Fixing the wiring in yourvape pen may seem complicated, but it is pretty easy when you do it correctly
and use the right tools and equipment. Our tips may revive your vape in perfect
shape, but always remember to ensure safety and avoid any risky event. If your
problem lies beyond our scope, don't hesitate to take help from our side.
Grab your favourite vape-whether nasty bar 8500 puffs or Myle meta 9000 puffs-from our online vape shop-disposable store. Ae.Cheers to your vaping!
